For screen reader problems with this website, please call281-907-96202 8 1 9 0 7 9 6 2 0Standard carrier rates apply to texts.
Rather than using multiple satellite speakers and a subwoofer, the Omni89AT allows a single enclosure to do the same job of four 42AT All-Terrain satellite speakers and a subwoofer, delivering the same legendary James landscape performance in a more compact above ground unit.
|Sensitivity||89dB 2.83V /1m|
|Speaker Type||Outdoor Loudspeaker|
|Midrange Size||3” x 4|
|Woofer Composition||Aluminum Cone|
|Number of Speakers||1|
James Loudspeaker designs and manufactures innovative solutions to accommodate the best in outdoor audio experiences and provide superior outdoor home theaters. The Omni89AT loudspeaker by James makes a great addition to the AT Series (All-Terrain) by offering a full range omnidirectional alternative to the simple landscape speaker where complete 360° wide coverage and above ground installation are needed. Typical applications include rock scape areas where traditional sat/sub combinations cannot be installed, or large open seating where full omni coverage is a benefit.
Rather than using multiple satellite speakers and a subwoofer, the Omni89AT allows a single enclosure to do the same job of four 42AT All-Terrain satellite speakers and a subwoofer, delivering the same legendary James landscape performance in a more compact above ground unit. Complete with 15 standard finishes and unlimited custom formats to allow seamless integration into all outdoor environments, this compact all-inclusive loudspeaker makes a great addition to any James landscape system where locating multiple speakers is difficult.
Performance comes from four James 3” proprietary all-terrain coaxial aluminum woofers with 0.75” aluminum tweeters, and a down firing aluminum 8” woofer, all in a 5052 marine aluminum enclosure for years of trouble free life. As with all James landscape products, the Omni89AT is available in both 70V and 4 ohms. 70V models use high-quality, low-loss, toroidal transformers which deliver optimal quality, so your system provides James performance whether it’s in 70V mode or 4 ohms. The system can be custom ordered in Bi-amp mode allowing more control of bass performance.
See the Omni48AT model if you are looking for a sat version to work with separate subwoofer.
The units, assembled and tested in Napa, California, are designed to blend seamlessly into your landscape environment.
Frequency Response: 33Hz-20kHz±3dB
Sensitivity: 89dB 2.83V /1m
Recommended Power Range: 50-250 watts/ 70V (50W)
Woofer: (1) 8” (203 mm) Aluminum Subwoofer
Mid: (4) 3” (76 mm) Aluminum Cone Woofer
Tweeter: (4) 0.75” (19 mm) Aluminum Dome Tweeter
Height: 17.4 in (441.96 mm)
Width: 9.75 in (247.65 mm)
Depth: 9.75 in (247.65 mm)
|Midrange Size:||3” x 4|
|Woofer Composition:||Aluminum Cone|
|Sensitivity:||89dB 2.83V /1m|
|Speaker Type:||Outdoor Loudspeaker|
|Number of Speakers||1|